Being a tiki bar owner today for more than five years I’ve discovered things that I want would’ve accomplished and also things which I’d never do once again. I’d love to show you my enhancements and/or errors to my tiki bar.

First I’d love to talk about a couple of things that I learned creating my very own outside bar. Outside, need I mention much more! The weather conditions in your town will figure out the way you develop your bar. Below are suggestions you have to consider in case you’re creating an outside tiki bar.

Your Climate In case you live in a location which has cold winters and warm summers, then you are going to encounter the same hurdles which I came against. Be sure you use treated wood for just about any surface that is available in contact with the soil. In case you do not stick to this rule next your tiki bar will get smaller and crack.

That’s exactly why you have to make use of addressed lumber; it shrinks much less and will last considerably longer. Whenever you’ve wood which is subjected to the climate you have to pay attention to the wood type using and proper addressing of the wood after it’s fitted.

Insects- I used white-colored cedar logs because of the building of my roof structure since cedar should be much less prone to insect damage. Okay, toss that out the window, I went along for 3 years with no insect issues until the year that is last. I noticed little chips and wood dust resting on my bar top part.

I thought it was coming from thatch breaking or even falling apart, but to my shock, I’d carpenter bees! After inspecting my white-colored cedar logs, I found holes approximately 3/8 inch bored in several of my logs. I knew I’d to handle this particular situation immediately and after performing a little research, I named an exterminator. A carpenter bee looks virtually the same to a typical bumble bee except for no locks on the abdomen, and also the men are powerless to sting. They adore all-natural cedar! May sure you use either a wood preservative or maybe a great Valspar varnish for your logs.

Bar Top- You will find numerous different opinions about what to work with on your bar top. I did skimp below, and sorry I did! It’s recommended you make use of marine plywood with the bar top part and for a valid reason. I used the next most sensible thing I thought, oak plywood.

The oak plywood was good for the very first few years, putting on approximately 10 coats of marine varnish. This will be okay except the tips of the plywood are extremely hard to seal. Once the water began getting into the wood, I’d like nothing but problems! To fix my problem, I put on glass tile to my tiki bar best utilizing waterproof adhesive and grout. The marine plywood is extremely costly but well well worth the money.

Palm Thatch, The lifetime of your respective top on the tiki bar, will certainly be based on your weather. You can find on changing your thatch palms a minimum of every 2 years. The sole method by which you can eliminate this particular problem is buying high-quality business synthetic thatch. The recognition of outside eateries with tiki thatch roofs has created a requirement of this synthetic thatch. I just re-thatched my bar with closed thatch that is going to give you an extra two years of extra life.

Securing Your Bar, Something I’d love to point out right here is anchoring your bar down is a crucial item. I’m lucky enough that my bar is sitting on a concrete apron around my swimming pool area. I utilized drop in concrete anchors to avoid my bar from blowing over in winds that are high. All in all I should have contacted a company that builds monster tiki huts, that way I wouldn’t have wasted some money in something that I have little expertise on.